-18-
SPECIFICATIONS
Input Voltage
10 - 16 VDC (negative ground)
Input Current
8.0 Amps @ 13.6 VDC (single 100W speaker)
16 Amps @ 13.6 VDC (dual 100W speakers)
Standby Current
Less than 150 mA
Audio Frequency
200Hz - 10 kHz + 3db
Audio Output
40 watts @13.6 VDC (single 100W speaker)
Output Power
105 WATTS RMS MAX. (15.0 VDC - single 100W speaker)
210 WATTS RMS MAX. (15.0 VDC - dual 100W speakers)
Siren Frequency
675Hz - 1633Hz
High Voltage Protection
16 - 18 VDC will cause siren output to cease, resume at normal
Short Circuit Current
50 AMPS (supply circuit must be capable of supplying this)
Operating Temperature
-15° F to +140°F
Controls
7-position rotary switch (Radio, Alert, Man, HF, Wail, Yelp, Phsr)
Momentary push-button Horn switch
Momentary push-button Manual/Toggle switch
Auxiliary input connection for remote Manual or Hands Free operation
-jumper programmable for positive or negative horn
Park Kill input connection
-jumper programmable for positive or negative
activation
Phaser (and Two-Tone) disable (jumper programmable)
Two-Tone activation swaps modes with Phaser (jumper programmable)
Diagnostic Indicators
Two LED indicators provide diagnostic feedback, one for each speaker.
Connections
(12-Pin Connector)
(Telephone Communication
Connector)
Detachable, 12-pin, positive locking connector with pigtail leads for Amplifier.
(2) Positive, (2) Negative, (2) Speaker, (2) Radio, Auxiliary, Park Kill, Horn
Telephone style communication cable between Control Head and Amplifier
Power wires with Fast-On spade terminals for Control Head power.
Size
Amplifier: 2 -1/2” High, 7” Wide, 7 -3/8” Deep (plus 3/4" flange on each side)
Control Head Face Plate: 2 -7/8" High, 6 -1/4" Wide, 1 -1/2" Deep
Control Head Mounting Hole: 2 -5/8" High, 5 -1/4" Wide, 2" Deep
Boxed Weight
6.35 lbs.
