Overview |
Software Installation
1
1
Overview
This document outlines the operation and functionality of the Signal Hound VSG25 vector signal
generator software. This document will guide you through the setup and operation of the software. You
can use this document to learn about the features of the generator and how to access them in the
application.
2
Preparation
SOFTWARE INSTALLATION
The software can be found on the CD included with your purchase or on our website
. The latest version of the software can always be found on our website.
Once you have located the software, run the setup.exe and follow the on-screen instructions. You must
have administrator privileges to install the software. You may be asked to install the Windows Runtime
Frameworks, as this must be installed for the software to run. The installer will install the device drivers
for the Signal Hound products during installation as well.
It is recommended to install the application folder in the default location.
SYSTEM REQUIREMENTS
Supported operating systems:
•
Windows 7 (32/64-bit)
•
Windows 8 (32/64-bit)
•
Windows 7 (32/64-bit)
Minimum system requirements:
•
No processor requirements
•
The software will average less than 1GB of memory
•
USB 2.0
DRIVER INSTALLATION
Drivers are distributed with the installer for both 32 and 64-bit systems. After installation the driver files
are located at
\drivers\x86\
and
\drivers\x64\
in the application directory.
If the drives did not successfully install during the installation process you can manually install them.
Содержание VSG25
Страница 1: ...VSG25 Software Manual...
Страница 4: ...iv 9 Warranty and Disclaimer 9...
