SIGMATEK SNC 021, Руководство пользователя

Страница: 28 / 35

SNC 021 S-DIAS SAFETY SNC INCREMENTAL ENCODER
Page 26 02.12.2019
10 Encoder Configuration
The maximum encoder frequency is defined with 750 kHz (at 1x edge analysis). This
corresponds to a maximum counter frequency or 1.5 MHz (at 4x edge analysis).
When selecting the encoder to install, this must be taken into consideration accordingly.
In the following table, the permissible speed in the rotary encoder for the respective
resolution based on the maximum encoder frequency can be seen.
Encoder Resolution
(Increments/Conversion)
Speed Scaling
Revolutions/Second Revolutions/Minute
60 12.500 750.000
80 9.375 562.500
100 7.500 450.000
128 5.859 351.563
150 5.000 300.000
200 3.750 225.000
256 2.930 175.781
512 1.465 87.891
1024 732 43.945
2048 366 21.973
4096 183 10.986
This is only a sample of possible encoder resolutions.
With the following formulas, the highest permissible rotation speed (revolutions/min) can be
determined for an encoder with a resolution that is not listed in the table above.
Revolutions/sec:
𝑛
𝑚𝑎𝑥
=
𝑓
𝑚𝑎𝑥
𝑅𝐸𝑆
Revolutions/min:
𝑛
𝑚𝑎𝑥
=
𝑓
𝑚𝑎𝑥
∗ 60
𝑅𝐸𝑆