SIGMATEK DC 061-1, Руководство пользователя

Страница: 9 / 47

S-DIAS AXIS MODULE DC 061-1
23.08.2019 Page 7
1.2 Disclaimer
The contents of this document were prepared with the greatest care. How-
ever, deviations cannot be ruled out. This document is regularly checked
and required corrections are included in the subsequent versions. The
machine manufacturer is responsible for the proper assembly, as well as
device configuration. The machine operator is responsible for safe han-
dling, as well as proper operation.
The current document can be found on our website. If necessary, contact
our support.
Subject to technical changes, which improve the performance of the devic-
es. The following documentation represents a series of product descrip-
tions. It does not guarantee properties under the warranty.
Please thoroughly read the corresponding data sheets, operating instruc-
tions and this system handbook before handling a product.
SIGMATEK GmbH & Co KG is not liable for damages caused through
non-compliance with these instructions or applicable regulations.
The general and special safety instructions described in the following sec-
tions, as well as technical regulations, must therefore be observed.