C-DIAS SAFETY CPU
CSCP 012
1.6
Page 5
Explanation of Safety Symbols
This symbol identifies important or additional information in relation to the opera-
tion of the individual components.
This symbol identifies danger for personnel, the environment or equipment. If
safety instructions are not observed, it can result in environmental or equipment
damage and/or pose a danger to the life and health of personnel.
Documentation Note
This documentation is intended exclusively for trained personnel in control and automation
technology. For installation and the initial start-up of individual module or the entire Safety
application, the instruction and explanations in this documentation and the Safety System
handbook must be followed explicitly.
Delivery Condition
The individual SIGMATEK Safety components are delivered in specific hard and software
configurations. Any change of this configuration, which exceeds the options specified in
this documentation, is not authorized and invalidates the warranty from SIGMATEK GmbH
& Co KG.
Operator Due Diligence
The operator must ensure that
•
the components are used for their designated purpose only.
•
the components are operated in error-free, fully functional condition only.
•
only sufficiently qualified and authorized personnel operate the components.
•
the documentation is complete and in readable condition and available at the site of op-
eration.
