Chapter 1
Quick Start
1-6
1.6 Process Setup
Follow these steps to build a process from the main (also called “power up”) screen.
Note:
If you are prompted for a password, use the switches along the left of the screen
to enter the password. The top switch is “1”, the bottom switch is “6”. If you forget the
password, see the System Parameters section for password setup.
Power
On
Move the rear panel power switch to the On (|) position. The
SQC-122c will briefly display its initialization information, then
go to normal operating mode.
Select
Quick Setup
Press the
Quick Setup
SoftKey to view the quick setup
parameters for the current process.
If no Quick Setup option is visible, no processes are defined in
the SQC-122c. In that case, press
Film Menu,
then scroll the
cursor until an <Empty> film is selected. Press
Create
to
create a new film, then press
Main Screen
. Now press
Process Menu
, then
Create
, then
Edit
. Select
Insert Layer
,
scroll to your new film and press
Enter
. Now press
Prev Menu
twice to return to the Main Menu.
THICKNESS(kA)
0.000
RATE(A/s)
0.0
P O W E R ( % )
0.0
Film
: Aluminum
L a y e r
: 1 of 1
Process
: My Process 1
Layer Rate
: 11.1
Final Thick
: 0.1011
Run Time
: 0:00:00
PHASE: Stopped
100.0
50.0
0.0
0.0
25.0
50.0
Power (% vs. Time)
Next
M e n u
Quick
Setup
Process
M e n u
Film
M e n u
System
Params
Start
12.5
37.5
Main Screen