2
2
C
C
O
O
M
M
P
P
U
U
T
T
E
E
R
R
S
S
E
E
T
T
-
-
U
U
P
P
Installing camera drivers…
A driver is necessary for your SD9 camera to communicate with SIGMA Photo Pro. On Macintosh, these
drivers are automatically installed during the application installation. For Windows systems, it may be
necessary to install these drivers using the Hardware Wizard.
1) Verify that the camera is OFF.
2) Plug the IEEE 1394 (FireWire™) or USB cable to the back of your computer and camera.
3) Turn the camera on and wait for the Hardware Wizard to appear.
4) Follow the Hardware Wizard instructions. When you are asked to specify a location for the
appropriate driver, navigate to the location you installed SIGMA Photo Pro. In a typical
installation, that path looks like:
C:\Program
Files\SIGMA\Photo Pro\Drivers
You may need to specify this location several times in the course of installing the driver.
5) Once you have specified the driver location, follow the remaining wizard instructions until you
are prompted to click
Finish
.
You may need to repeat this process for both USB and IEEE 1394 (FireWire™).
Never connect the camera to the computer with both USB and IEEE 1394 (FireWire™) at the same time.
SIGMA Photo Pro User Guide
8
