48
M MANUAL EXPOSURE
Set both the shutter speed and aperture value according to the
indication of the exposure meter. You can change the exposure, as
you desire.
1
Set the Mode Dial to the
M
position.
(The shutter speed is illuminated in
orange. The aperture value indicator is
illuminated in green.)
2
Set the desired aperture value by
rotating the Command Dial.
3
Set the shutter speed with the
buttons to adjust the value of the
exposure meter to
±0.0
.
The exposure meter can display an
exposure error of up to ± 3 stops from
the correct exposure in 1
/
3 steps. If the
exposure error is more than three stops,
the exposure meter will blink.
4
Press the shutter button “half-way” to
verify the focus and take the picture.
It is possible to change the combination of shutter speed and aperture
value as follows.
Shutter Speed
Aperture
30s ~ 1/1250s
F2.8 ~ F16
1/1600s
F4.0 ~ F16
1/2000s
F5.6 ~ F16
When the aperture value is set to an unavailable value by changing the
shutter speed value, the shutter speed value will be changed to an
available value automatically.
When the shutter speed value is set to an unavailable value by changing
the aperture value, the aperture value will be changed to an available
value automatically.
