14810
•
January2005
•
Operation
Page
9
Due to the nature of some of the parameters able to be modified, it may be desired to
change all or selected groups of outputs simultaneously. To accommodate this, grouping of
outputs is also provided.
OUTPUT GROUPING
To allow flexibility and convenience, the DA5315 can be configured to group output signals
with multiple channels having their configuration parameters modified simultaneously.
There are three different signal groupings available in the DA5315 that are set under the
output grouping menu .
a.
Independent - Each channel’s delay is set individually.
b.
Pair - - Output pairs (as defined by the output settings) have their delay
set together. When the PAIR mode is active, only the odd channels will
appear as available menu selections when toggling through the menu.
c.
All - - All outputs are simultaneously set for the same delay. When the
ALL mode is active, toggling through channels on the menu is disabled.
CHANNEL DELAY
Each channel can have its delay adjusted up to 10 seconds. Since the flexibility of the
DA5315 allows it to operate in many different audio/video environments, the units of the
configured delay display are also able to be modified.
Manual Delay
When configured for manual delay ( set to OFF), the output channels are able to be
delayed up to 10 seconds. Depending upon the output grouping setting (see above), chan-
nel delays are able to be adjusted independently, in 100/th second increments using the
menu item.
AUTO-DELAY
This mode is not currently supported.
