Sigma 6-16S Скачать руководство пользователя

Страница: 26 / 91

Laboratory Centrifuge Sigma 6-16S

4 Storage and transport

26 / 91

Version 07/2012, Rev. 1.22 of 08/05/2020

• sb

Translation of the original operating manual, part no. 0702002

4.4

Packaging

The centrifuge is packaged in a wooden crate.
•  After taking off the lid, remove the side panels.
•  Remove the packaging material.
•  Lift the centrifuge upwards with a lifting device to lift it safely. When

lifting the centrifuge, always reach under the centrifuge from the side.

CAUTION

The centrifuge weighs approx. 116 kg!

• Retain the packaging for any possible future transport of the centrifuge.

4.5

Transport safety device

The transport safety device consists of two plastic screws which are located
at the bottom panel.

CAUTION

The transport safety device must be removed prior to start-up because the
screws lock the motor bearings!

Removal

• Lift the centrifuge upwards at the front side. Always reach under from

the side.

• Put a suitable object, e.g. a wooden block, between the table and centri-

fuge. The two plastic screws can now be seen at the bottom panel.

Locking screws

Fig. 6: Locking screws (transport safety device)

• Unscrew the screws by hand anti-clockwise.
• Retain the transport safety device for the possibility of the return of the

centrifuge.

Содержание 6-16S




























































































Результаты поиска

Содержание 6-16S

Отзывы:

Похожие инструкции для 6-16S

Бренды по названию

Популярные бренды

Sigma 6-16S, Руководство по эксплуатации

Результаты поиска

Содержание 6-16S

Отзывы:

Похожие инструкции для 6-16S

Бренды по названию

Популярные бренды