- 6 -
5.1.8
“
η(φ)
T
A
”
:
Current temperature value input (effective measurement interface)/ Curvature
diameter correction coefficient modification (effective opening the camber
compensation)
5.1.9
“
OFF
ON
”
:
Turn on/off
5.1.10
“ ”
:
Increasing progressively or moving upwards
5.1.11
“ ”
:
Decreasing progressively or moving downwards
5.2
Display icon definition
5.2.1 “ ”indicate the current power margin. When the power margin is less than 1/3,
instrument will issue two consecutive tones every 30 seconds, then continue using a period of
time, the instrument will automatically shutdown for protection, and remind should to
charge now.
5.2.2“ TA=??? ”indicate temperature sensor is not connected, when “temperature
compensation mode” select the “temperature sensor” of “Automatic temperature
compensation”, the “normal measurement mode ”and the “calibration measuring mode”
will appear the icon neither connected with the temperature sensor nor sensor broken nor
detecting temperature is less than or equal to zero.
5.2.3 “
”indicating that the buzzer alarm is turned on, when “measurement mode” select”
continuity measurement” and buzzer “Beep” selected ON also, the icon of “continuity
measurement mode” will display this icon.
5.3 Operating concepts
5.3.1
Turn of/ turn off
5.3.1.1
In the turning off state, press key “
OFF
ON
”for 2 seconds, the screen appears welcome
interface, and reminds to insert the probe, showing as below.
5.3.1.2
Press the measurement key “MEAS”
、
setting key “SET” or calibration key ”CAL”
to go into the corresponding interface directly.Or wait the welcome interface timing
finished to go into the measurement interface automatically.