Sigma 10208 Скачать руководство пользователя страница 15

Страница: 15 / 65

Version 04/2008, Rev. 1.18 of 07/06/2012

page 15 of 65

Translation of the original operating manual

2.2 Symbols used in the Operating Manual

Symbols used in the Operating Manual:

Symbol

Title

Gefährliche elektrische Spannung
Dangerous voltage
Courant haute tension

Achtung, mögliche gefährliche Situation
Attention, potentially dangerous situation
Attention, situation potentiellement dangereuse

Attention!

Hinweis auf wichtige Sachverhalte
Note concerning important facts
Information très importante

Fig. 2.2: Symbols used in the Operating Manual

2.3 Informal Notes on Safety

The operating manual is an integral part of the product.

•

Please retain the operating manual throughout the service life of the

centrifuge.

•

Please hand the operating manual over to any subsequent owner or user of

the centrifuge.

•

Please add any amendments that you receive to the manual.

•

Please make the operating manual readily available at the exact location of

the centrifuge at all times.

•

The operating personnel must have read and understood the operating

manual prior to operation.

•

Please also comply with the general and company-specific rules and

regulations for the prevention of accidents.

Содержание 10208


































































Результаты поиска

Содержание 10208

Отзывы:

Бренды по названию

Популярные бренды

Sigma 10208, Руководство по эксплуатации

Результаты поиска

Содержание 10208

Отзывы:

Бренды по названию

Популярные бренды