Refrigerated Centrifuge for Robot Use Sigma 4-5KRL
Refrigerated Centrifuge for Robot Use Sigma 4-5KRL IVD
6 Using the centrifuge
44 / 113
Version 11/2017, Rev. 1.7.1 of 08/12/2022
• sb
Translation of the original operating manual,
→
6.3.2.9
Acceleration and deceleration curves
Acceleration
This function is used to select an acceleration curve. The system offers 10
fixed, programmed acceleration curves (curves 0-9).
Brake
This function is used in order to select a curve that decelerates the
centrifuge to a standstill. Deceleration curves are inverted images of the
acceleration curves and are labelled with identical numbers. Deceleration
curve no. 0 represents a brakeless deceleration.
Fig. 21: Preselection of a curve; here: preselection of an acceleration curve
6.3.2.10 Program lock ("ProgLock")
When the program lock is active, it is impossible to save any new
programs. In this case, the function "save program" is disabled.
In order to activate the program lock:
• Select the "ProgLock" symbol with the cursor and confirm the selection.
The symbol and the bar under the symbol start to flash.
• Activate the function by turning the function knob. The symbol remains
displayed in a permanent manner and the bar continues to flash.
• Turning the function knob further will deactivate the function. In this
case, the symbol disappears but the bar continues to flash.
• Press the function knob in order to activate the desired setting. The bar
remains visible as long as the cursor is placed over the symbol.
Fig. 22:
The program lock “ProgLock” is activated
