Rev NS001b004 Software Installation
page 15
This chapter describes the software installation procedure for NetStream
2000TV. Follow the directions carefully to help ensure proper operation.
Software Installation for Windows 9x/Me/2000.
1.
After installing NetStream 2000TV and making all appropriate
hardware connections, turn on the power to your computer. The
Plug and Play feature of NetStream 2000TV, if properly detected
by Windows 9x/Me/2000 will display the message
New
Hardware Found
along with the NetStream 2000TV signature
during boot-up.
2.
When the
New Hardware Found
message appears, choose the
option Driver from disk provided by hardware manufacturer and
then click
OK
.
3.
The
Install From Disk
dialog appears. Insert the NetStream
2000TV Windows 9x/Me Disk #1 (or theNetStream 2000TV
Windows 2000 Disk #1 for Windows 2000) into the floppy disk
drive.
4.
Make sure the dialog specifies the floppy disk drive letter (for
example, A:\ ) and click
OK
to copy drivers and software for the
NetStream 2000 TV to your hard disk.
5.
When the copy is complete, the Windows desktop will appear.
Remove Disk #1 from the disk drive.
6.
Run
Setup
from the NetStream 2000TV Windows 9x/Me Disk #2
(or theNetStream 2000TV Windows 2000 Disk #2 for Windows
2000). Insert Disk #3 when Setup requests it. After installing the
applications, Setup will run Auto Calibration to adjust borders and
colors. For finer adjustments, see Border Adjustment and Color
Calibration‚ page 16.
Chapter 3: Software Installation
Note 9.
Verify that DirectX/DirectShow is installed BEFORE installing
NetStream 2000TV software. The DirectShow interface is required by
DirectShow applications for NetStream 2000TV, such as video streaming
clients. DirectX versions 7 and earlier permit the highest priority assigned to
NetStream 2000TV, but DirectX 8 does not; this affects the proper selection
of DirectShow filters for playback. Developers can assign the correct filters
through
GraphEdt
of the DirectShow SDK or through their application.
Note 10.
You must run Setup a second time to assign your DVD movie region
code if you are not using a RPC2 DVD-ROM drive (see Setting and Changing
the DVD Region Code‚ page 19).
