SIGLENT SDS1000CML+, Руководство пользователя

Страница: 23 / 159

SIGLENT
SDS/SD User Manual
13
2.3 Auto Setup
The SDS/SD Series Digital Storage Oscilloscopes have a
Auto Setup function that identifies the waveform types and automatically adjusts
controls to produce a usable display of the input signal.
Press the AUTO button, and then press the menu option button adjacent to the
desired waveform as follows:
Picture 2-3
Table 2-1 Auto Set function Menu:
Option Description
（
Multi-cycle sine
）
Auto set the screen and display several
cyc signal.
（
Single-cycle sine
）
Set the screen and auto display single cyc
signal.
（
Rising edge
）
Auto set and show the rising time.
（
Falling edge
）
Auto set and show the falling time.
（
Undo Setup
）
Causes the oscilloscope to recall the
previous setup.
Auto set determines the trigger source based on the following conditions:
● If multiple channels have signals, channel with the lowest frequency signal.
● No signals found, the lowest-numbered channel displayed when Auto set was
invoked
● No signals found and no channels displayed, oscilloscope displays and uses
channel
1.