SightLine ICD-4000-OEM, Руководство пользователя

Страница: 8 / 21

ICD-4000-OEM
© SightLine Applications, Inc. 6
(4000-OEM (J6) Pinout table continued)
26 VIN_D6 CbCr 6, G 6 25 VIN_D7 CbCr 7, G 7
28 VIN_D4 CbCr 4, G 4 27 VIN_D5 CbCr 5, G 5
30 VIN_D2 CbCr 2, G 2 29 VIN_D3 CbCr 3, G 3
32 VIN_D0 CbCr 0, G 0 31 VIN_D1 CbCr 1, G 1
34 Ground 33 Ground
36 NC 35 NC
38 NC 37 NC
40 NC 39 NC
42 Port ID (out) See pin notes 41 NC
44 Ground 43 Ground
46 NC 45 VIN_HSYNC Horizontal Sync
48 NC 47 VIN_VSYNC Vertical Sync
50 NC 49 VIN_FLD Field
52 NC 51 VIN_DE Optional
54 Ground 53 Ground
56 Passthrough ground 55 Passthrough VIN See J50 *
58 Passthrough ground 57 Passthrough VIN See J50 *
60 Passthrough ground 59 Passthrough VIN See J50 *
62 Passthrough ground 61 Passthrough VIN See J50 *
64 Ground 63 Ground
66 TX2 3.3V TTL 65 RX2 3.3V TTL
68 BLSP8_I
2
C _SDA I
2
C-1 67 BLSP8_I
2
C _SCL I
2
C-1 (400 kHz)
70 GPIO1_3000_BRD GPIO_453 69 GPIO0_3000_BRD GPIO_452
72 GPIO3_3000_BRD GPIO_455 71 GPIO2_3000_BRD GPIO_454
74 GPIO5_3000_BRD GPIO_457 73 GPIO4_3000_BRD GPIO_456
76 +3.3V (out) 75 +3.3V (out)
78 Ground 77 Ground
80 +1.8V (out) 79 +1.8V (out)
* Passthrough power available. Max voltage = VIN (See VIN Specifications ). Max Current = 1.2A spread across four power and ground pins.
5.4 Connector J7: 4000-DEBUG / Recovery
A debug serial port is exposed on connector J7 and should be used for debugging only.
Connector: Molex 8 POS, 53398-0871 Mates with: Molex 8 POS Housing, 51021-0800
Table 5: 4000-DEBUG
Pin Description Pin Description
2 USB3_P0_HS_D_P 1 USB3_P0_HS_D_N
4 uUSB_VBUS 3 GND
6 VOL_N (FASTBOOT_RECOVERY
switch) 5 QFIL_USB_SELECT
9 BLSP8_UART_RX (1.8V) 7 BLSP8_UART_TX (1.8)

Debug serial port is 1.8V TTL .

Currently there is not a way to repurpose this port for use by an application on the 4000-OEM. Note
that Serial 0 on both the 1500 and 3000 can be repurposed using a silent command. This approach
does not work on 4000-OEM hardware.

See the 4000-DEBUG section for more information.