ICD-4000-OEM
Revision History
Date
Description
2022-06-07
Clarify camera requirements for pixel clock rate and blanking.
2022-05-27
Added caution note to disconnect the power before connecting or disconnecting cables.
2022-05-24
Revised Pin 1 and Pin 2 on J16 HDMI Output Video (FFC connector) are not for customer use.
2021-04-25
Updated 4000-OEM connector diagram to show DEPANEL tab protrusion.
2022-04-18
Updated BT.1120 support.
2022-03-07
Updated Supported Standards section.
2022-01-27
Removed serial port converter warning for connector J8: USB 3.0 (Type-C).
2021-12-06
Corrected camera naming conventions for connector J8: USB 3.0 (Type-C).
2021-12-01
Updated Linux column in the 4000-OEM Software Cross Reference table.
2021-11-17
Added mating cycle rating to J9 MIPI connector.
2021-10-26
Expanded connector table to include mates with column.
2021-10-14
Added 4000-OEM GPIO table.
2021-09-02
Added Serial Port tables.
2021-05-12
Clarified Lattice FPGA input pixel clock limitations in Pixel Clock Requirements section.
2020-12-15
Moved Camera Input Adapter Board ID table to ICD-3000-4000-Adapter Boards.
2020-12-01
Added section on changing I2C bus speed to support 921K baud camera.
2020-10-23
Updated the following sections: LED Summary, GPIO Summary, Connector J4, Video Output Description, Signal
Levels and Lattice Crosslink FPGA, 8-Bit BT.656, Synchronization Signals, Pixel Clock Requirements.
2020-10-02
Added note that debug port cannot be repurposed.
2020-09-11
Corrected I2C pin designations to match schematic. Add current 400 kHz frequent note to connector J6 pinout table
and connector J9 pinout table.
2020-08-24
Corrected Grayscale bit locations in the Connector J6: 3000/4000 Input Board Table.
2020-08-14
Updated J16 HDMI (FFC connector) table - Pin 1 is the same as Pin 2.
2020-07-20
Corrected HDMI Output connector label in Video Output section.
2020-07-16
Added GPIO numbers to J6 pinout table.
2020-07-08
Added EAN-OEM-Recovery link to 4000-DEBUG section.
2020-06-01
Added maximum width and height of acquired image and ROI.
2020-04-16
Added warning that the 4000-OEM should not be powered through connector J8: USB 3.0 (Type-C).
2020-04-08
Added new section - Customer Designed 4000-OEM Boards and Camera Interface Options.
2020-03-10
Added note that FPGA now supports multiple pixel widths in 3.01 software. Added FPGA Video Resolution and Pixel
Clock Requirements table for 3.01 software.
2020-01-24
Added max voltage, current and power connector notation to pins 55, 57, 59, 61. Corrected power connector label.
2020-01-17
Added more video format details. Add section on FPGA video resolution requirements.
2020-01-14
Added notes on connector J6 data bit locations.
2019-12-14
Corrected MIPI board serial ports to 4,6,7. Add link to MIPI board ICD.
2019-11-26
Corrected I2Creference for connector 6 and connector 9 in Connector Descriptions table and Pin 20 and 21 in MIPI
Port table.
2019-10-17
Added voltage qualification note to specifications.
2019-09-17
Corrected pins in Serial Port / GPIO table for connector J2.
2019-08-09
Changed GPIO label to SW labels. Revised heatsink statement.
