ICD-1500-Adapter-Boards
© SightLine Applications, Inc.
7
Table 2: 1500-AB Connector Summary
Label
MFG Part Number
Function
Mates with:
J1
RCJ-044 (yellow RCA jack)
Analog video input 0
RCA cable
J2
39502-1004
5VDC power and RS232 serial 0
39500-0004
J3
Molex 53398-1471 (14-pin)
mates with J3 on OEM
Analog video, power, serial, Ethernet
SLA-CAB-1514
J4
RCJ-044
(yellow RCA jack)
Analog video output
RCA cable
J5
Molex 53398-1271
mates with J5 on OEM
JTAG, USB
Molex 51021-1200
J6
5520251-4 Modular Jack
10/100 Base-T Ethernet
Ethernet cable
J7
182-009-113R531 DB-9 Male RS232 serial 0
DB9 cable
J8
FCI 87583-2010BLF
Type-A USB port
Type-A USB cable
J9
12-Pin 2-row Male Header
JTAG (unpopulated connector)
12-Pin ribbon cable
J10
FH12-30S-0.5SH(55)
Digital video FFC connector
AB-FF06
J11
20-Pin Male Header
Digital connector breakout (Rev C+)
Female header
J12
RCJ-044
(yellow RCA jack)
Analog video input 1
RCA cable
J13
3-Pin Molex 53047-0310
Serial port 1 at RS-232 levels (see
Table 3
) Molex 051021-0300 / SLA-CAB-0303
J14
3-Pin Molex 53047-0310
Serial port 2 at RS-232 levels (see
Table 3
) Molex 051021-0300 / SLA-CAB-0303
P4
Hirose DF12B-50DS-0.5V(86) Digital video connector
SLA-1500-OEM J4 DF12B-50DP-0.5V(86)
Table 3: 1500-AB Connector Descriptions
Connector J1: Analog Video Input 0
NTSC and PAL analog video input 0.
Connector J2: Power + RS-232 Serial Port 0
Provides 5V power to 1500-OEM, as well as access to serial port 0 at RS232
levels.
If the 1500-SONY or 1500-HITACHI board is also connected, which provide
power to the OEM via OEM J4, DO NOT turn on switch SW1.
Serial 0 is connected to both J2 and J7. Do not connect to serial port on
both connectors at the same time.
Pin
Signal
Description
1
Power
4.5V - 5.5V
2
GND
Ground
3
TX 0
RS-232C level serial port. Share ground with PIN 2.
4
RX 0
Connector J3: Analog Video, Power, Serial
0, Ethernet to OEM
This port uses the standard pinout defined in
Connector J4: Analog Video Output
NTSC analog video output.
Connector J5: FPGA JTAG, USB
(only rarely connected)
Pin
Signal
Pin
Signal
1
USB VBUS
7
FPGA TMS
2
USB-
8
FPGA TDI
3
USB+
9
GPIO145 at 1.8V IO
4
USBID
10
FPGA TRST
5
GND
11
FPGA TDO
6
FPGA TCK
12
GPIO144 at 1.8V IO
