ICD-1500-Adapter-Boards
© SightLine Applications, Inc.
1
1
Overview
System interface boards provide options for network interfacing, serial ports, and GPIO.
Camera
interface and adapter boards provide an interface from the camera to OEM
.
Boards can be attached directly to the 1500-OEM or through a secondary adapter allowing customers
to swap out modules for custom configurations. Design files are also available for customers to build
their own boards. Contact
for the latest boards available.
CAUTION:
Any customer modifications to SightLine OEM and adapter boards will void the warranty and can
potentially damage the board. Before attempting any modifications, please contact
1.1
Available Adapter Boards
The 1500-RAB and 1500-RABn Microhard radio interface boards have been discontinued. Contact
for legacy documentation and Microhard radio interface board recommendations.
1.2
Additional Support Documentation
Additional Engineering Application Notes (EANs) can be found on the
SightLine Applications website.
The
provides a complete overview of settings and dialog windows located in the
Help menu of the Panel Plus application.
The Interface Command and Control
describes the native communications protocol used by the
SightLine Applications product line. The IDD is also available as a PDF download on the
page under Software Support Documentation.
1.3
Sightline Software Requirements
IMPORTANT:
The Panel Plus software version should match the firmware version running on the
board. Firmware and Panel Plus software versions are available on the
2
Safe Device Handling
CAUTION:
To prevent damage to hardware boards, use a conductive wrist strap attached to a good earth ground.
Before picking up an ESD sensitive electronic component, discharge built up static by touching a grounded bare
metal surface or approved antistatic mat.
