EAN-Startup Guide-3000-OEM
© SightLine Applications, Inc.
2
Configuration notes:
•
If a wireless adapter is active on the host PC it should be disabled.
•
If using the link local address, assign a static IP address to the host PC of 169.254.X.X, where X is 1-
254 (do not use 181). Use a subnet mask of 255.255.0.0.
•
Problems with outbound streaming are often related to setting/assigning IP addresses and ports.
See the Encoding Configuration settings in
3
Serial Communications
For a direct serial connection use the 9-pin serial connection. A serial COM connector is included in the
EVAL kits for both the SLA-3000-mIO and the SLA-3000-IO boards. Connecting to the serial COM port
on both boards from a host PC requires a null modem adapter or null modem serial cable.
For the SLA-3000-IO the serial COM connector and must be wired to the board power adapter as
shown in
Figure 2
. The pinout for this cable can be found in the
document.
Use a direct serial connection for troubleshooting or if a network connection cannot be established.
Figure 2: Serial COM and Power Connection-SLA-3000-IO
4
SLA-EVAL-3000-MIO Kit
Provides a complete laboratory bench / development interface with standard connectors. For
additional options and interface boards, please contact
. To review all the interface board options,
see the
page on the SightLine Applications website.
Table 1: SLA-EVAL-3000-MIO Kit
Part Number
Qty Description
Part Number
Qty Description
3000-OEM
1 Video processing board
SL00764
1 HDMI Type A male connector standard
3000-mIO
*
1 Main interface board for the 3000-OEM
SLA-CAB-0303
1 3-pin PicoBlade to DB9
4000-OEM-MP
1 4000-OEM mounting base
SLA-CAB-0403
1 6-inch cable, 4-Pin PicoBlade to modular jack
SLA-DIST
1 PWR/ENET distribution board
SLA-CAB-P103
1 RF179 cable assy, BNC bulkhead jack to MCX
3000-HDSDI-IN
1 HD-SDI interface board
SLA-CAB-0302
2 3-pin PicoBlade pigtail
SLA-CAB-0404
1 4-pin Molex PicoBlade, 3.0 inches, GEN (WHT)
SLA-CAB-0402
2 4-pin PicoBlade pigtail
SLA-CAB-0405
1 4-pin Molex PicoBlade, 3.0 inches, PWR (BLK/RED)
SLA-CAB-HD10
1 10cm Length FPC ribbon flat cable for HDMI
SLA-PAD-010
1 Thermal pad 1.0-inch x 1.0-inch x 0.010 inch
SLA-CAB-MCX2BNC
1 Cable, MCX (RA) to BNC(M) for HDSDI-IN
SLA-PAD-020
1 Thermal pad 0.75-inch X 0.75-inch x 0.020 inch
SLA-CAB-ETH0
1 Ethernet cable CAT 5e 3ft
SLA-PAD-125
1 Thermal pad 0.250-inch x 0.250-inch x 0.125 inch
SLA-CAM-HDSDI
1 HD-SDI 1080p camera
SLA-PWR-B12V
1 12V power supply w/2-pin connector
SLA-PWR-A12V
1 12V Power supply for camera
SLA-CAB-1504
1 12V power cable to PicoBlade
SLA-MSD-ADPT
1 SD adapter
SLA-MSD-32GB
1 32 GB microSD memory card (class 10 SDHC)
SLA-DOC-LICENSE
1 Hardware license
SLA-CAB-S001
1 Serial adapter (stripped)
Mounting hardware
-
Spacers and mounting screws
*
The SLA-3000-IO board is alternate interface board for the 3000-OEM that comes in the SLA-EVAL-3000 kit.
J5 (5-pin)
SLA-PWR-C12V
Null Modem Serial
Cable to PC
Serial 0
SLA-3000-IO
Board
