.
Hardware Bag
2 Control Horn
Small Nylon Control Horn
4 Horn Screw
2-56x3/8 Machine Screw
1 Elevator Joine
1/8x3 Birch Dowel
4 Main Landing Gear Screw
#4 X1/2 Sheet Metal Screw
2 Wing Dowels
3/16 dia. x3 3/4 Birch Dowel
1 Tail Wheel Wire
1/16 dia. x3 Music Wire
2 Torque Rod Bearing Tube
1/8 OD. x2 3/8 Nylon Tube
2 Aileron Torque Rod Fittings
Molded Nylon Fitting
1 Wing Center Section Tape
1 x20 Nylon Tape
1 LC-506-11
3mmx6x18 Laser Cut Poplar Ply Sheet
The first thing that you need to do is to identify and mark the part numbers on the laser cut parts using the drawings on the
following pages as a guide.
It is possible that several of the laser cut parts may not be completely cut through. If this is the case you can free the part from
the sheet quickly using an X-acto knife.
NOTE: The slight discoloration on the edges of the laser cut parts may be removed by lightly sanding the edges with 400 grit
sandpaper.
