SifWeld Evolution MTS400 SYN Скачать руководство пользователя страница 33

Страница: 33 / 40

4.1 Spool Gun Display

Set up installation for Spool Gun

Insert the earth cable plug into the negative (-) socket on the front of the machine and twist to tighten.

Connect the Spool Gun to the MIG torch connection socket on the front panel of the wire feeder, and

tighten it.

IMPORTANT!

When connecting the torch be sure to tighten the connection. A loose connection can

result in the connector arcing and damaging the machine and gun connector.

Connect the Spool Gun control cable to the multipin receptacle on the front panel of the wire feeder.

Connect the gas line to gas connector on the rear panel of wire feeder.

Connect the control cable of wire feeder with the aero socket on the rear panel of welding machine.

Connect the cable of wire feeder with the positive output of welding machine.

Connect the gas regulator to the Gas Cylinder and connect the gas line to the Gas Regulator.

Connect the power cable of welding machine with the output switch in electric box on site.

DIAGRAM FOR GUN

Set up installation for Spool Gun

(1) Insert the earth cable plug into the Negative socket on the front of the machine and

tighten it.

(2) Connect the Spool Gun to the MIG torch connection socket on the front panel of the

wire feeder, and tighten it.

IMPORTANT:

When connecting the torch be sure to tighten the connection. A loose

connection can result in the connector arcing and damaging the machine and gun
connector.

(3) Connect the Spool Gun control cable to the multipin receptacle on the front panel of

the wire feeder.

Neck Liner

4. Operation

Before starting any welding activity ensure that you have suitable eye protection and protective
clothing. Also take the necessary steps to protect any persons within the area.

Содержание Evolution MTS400 SYN









































Результаты поиска

Содержание Evolution MTS400 SYN

Отзывы:

Похожие инструкции для Evolution MTS400 SYN

Бренды по названию

Популярные бренды

SifWeld Evolution MTS400 SYN, Руководство по эксплуатации

Результаты поиска

Содержание Evolution MTS400 SYN

Отзывы:

Похожие инструкции для Evolution MTS400 SYN

Бренды по названию

Популярные бренды