www.sifweld.com
5
Danger of personal injury:
The operator must wear appropriate protective gear.
Protect the working zone from air flow. Do not weld on painted surfaces. Do not
weld on wet surfaces. Never place your face, hand or other body parts in front of
the contact tip while feeding the wire electrode.
Danger for the hands
: Your skin must not get in contact with the welding torch!
Always put on welding gloves before welding.
Danger of material damage or personal injury
: Make sure that the torch cable
assembly is not twisted and does not chafe against sharp edges. Damaged
insulation of the cable assembly must be repaired by a qualified technician
immediately.
All control wires must be protected against over-tension to avoid damages to all
peripheral devices, such as robots, handling equipment, electronic contour units,
power sources or wire feeders.
Do not roll over this product with forklifts or similar.
Do not fix the torch in a vice.
In case of an accident, disconnect the supplies of electric power, compressed air
and shielding gas immediately. In addition to this manual, always observe all
safety instructions and the relevant accident prevention regulations. Ensure you
follow and appropriate method statements, developed from a thorough
risk assessment.
!
!
All WELDABILITY SIF products are manufactured using the relevant technology and in accordance
with approved safety regulations. To avoid injuries when using your SifGun Evolution torch the
following safety requirements must be carefully observed:
Содержание EXTEVOMT1504
Страница 16: ...www sifweld com 16 ...
