manualshive.com logo in svg

Sifam Tinsley ND20LITE, Руководство пользователя

Поделиться
Скачать
Sifam Tinsley ND20LITE Скачать руководство пользователя страница 5

5

1. APPLICATION

The ND20LITE meter is a digital programmable panel meter destined 
for the measurement of single-phase power network parameters (2-wire 
network) and 3-phase, 3,4-wire network in balanced and unbalanced 
systems with the simultaneous display of measured quantities on a LCD 
display. The meter enables the control and optimization of power elec-
tronics devices, systems and industrial installation operations.
The meter ensures the measurement of: rms values of voltage and 
current, active, reactive and apparent power, active, reactive energy, 
power factors, frequency, 15, 30, 60 minutes’ mean active power, 
THD. Additionally, the current value in the neutral wire is calculated. 
Voltages and currents are multiplied by given voltage and current ratios of 
measuring transformers. Indications of power and energy take into consi-
deration values of programmed ratios. The value of each measured quan-
tity can be transmitted to the master system through the RS-485 interface. 
The relay output signals the overflow of the chosen quantity, and the 
pulse output can be used for the consumption check of 3-phase active 
and reactive energy.
The meter has a galvanic separation between respective blocks:
       - supply, 
       - measuring inputs,
       - voltage and current inputs,
       - RS-485 output,
       - impulse output.

Содержание ND20LITE

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды