Siesta AHQ100AV1, Руководство по установке

Страница: 10 / 24

1-8
How to Remove Air Inlet Grille
Remove the air inlet grille by both hands as the direction
shown.
Loosen the screw for
Þ
xing the panel arm (3 screw, left,
right and center). Do not remove the screw at this time.
1.
2.
Air Inlet Grille
Axis of the Front Panel
Rib
Grille Holder (Center)
(Optional)
Screw
Air Inlet Grille Holder
Grille Holder (Center)
Grille Holder (L/R)
Move the air inlet grille upward, and then turn it backwards.
(Do not use too much force).
Remove the grille holder (both left and right side). After
that, remove the air intake grille.
Remove the grille holder (center) from the panel. 3.
4.
5.
How to Install the Air Filter
(A)
(A)
(B) (B)
Snap in the Þ lter in order to secure it
Install the Þ lter to the panel in the (A) direction
follow by (B) to secure the
Þ
lter.
To Adjust the Vane Direction
Adjust the vane linkage as the direction shown to get the required
vane direction
Dimension of the fresh air intake hole
70mm
Ø 3mm
70mm
Ø 64mm