Siesta ACQ 100 AV1, Руководство по установке

Страница: 9 / 16

1-7
English
Figure 2 Figure 3
Figure 4 Figure 5
Wires Installation
Figure 1 and Figure 2 shows the location of cover wire in Indoor unit.
Steps to install power supply wires and wires from outdoor unit.
1. Remove wire cover by removing 2 screws as shown in Figure 3.
2. Wires will go through the hole as shown in Figure 4 and 5 respectively without crossing the height of the hole.
3. After that, wire cover will be assembled back to close the wire.
Figure 1
!
CAUTION
Do not install the unit at altitude over 2000m for both indoor and outdoor.
Power supply
terminal block
Shape wires so
that the stop valve
cover
fi t securely.
A
1-3
B
A<B
1 EN 5CKYER-0411(0) SIESTA.indd 7 1 EN 5CKYER-0411(0) SIESTA.indd 7 6/3/11 11:56:19 AM 6/3/11 11:56:19 AM