Sierra RedyCompact Meter, Инструкция по эксплуатации, Страница: 43 / 73

43
4.12
Settings
In the settings menu you can adjust the user variables. See the chapters below
for more details.
4.12.1 Measurement
The RedyCompact has 2 measurement modes. When you set the
measurement to “Auto”:
1) When on battery it takes a flow sample every 300 milliseconds and due
to that extends the battery life
2) When on external power (24 VDC or USB) it takes a flow sample every
40 millisecond and due to that will have a faster response and a more
accurate totalizer when you have fluctuating flows. With this menu you can
force either measurement mode independent of the power source.
If the measurement setting is forced to “performance” and the unit is operating on the battery, the
display shows “PERF”. If the measurement setting is forced to “Economy” and you use an external
power supply the disp
lay shows “ECO”. Please note that in “ECO” mode the backlight is always off.
4.12.2 Display
In the display menu you can configure the settings for the display. Below
you find more details on the individual settings of the display.
4.12.2.1 Home Screen
There are 6 different home screens in horizontal mode and one in vertical
mode (see
4.10.6 Home screens ). In this menu you can deactivate up to 5
home screens (one home screen must stay activated).
Caution
Please note that when you set the measurement mode to “Performance” and you use
the unit on battery the battery life is limited.
Overview
□
Flow
□
Totalizer
□
Alarm (A1)
□
Alarm (A2)
□
Alarm (A3)
□
> Display auto off
> Light auto off
> Backlight
> Home screens
> Orientation
> Touch input
Recalibrate