Appendix C. EmailSend Using the
Gmail Outgoing SMTP Server
The datalogger has a mail client in it similar to a mail client on a computer.
For the datalogger to send an email, it needs an SMTP server to send through
like any other mail client. The Gmail SMTP server can be used for sending
outgoing email from the datalogger. Both the modem and the datalogger must
be configured for PPP as described in Appendix B.
C.1 Setting up a Gmail Account
First you need to create a Gmail account if you do not already have one. To
create one go to
www.gmail.com
from your PC to create an account. Gmail
accounts are free of charge.
The credentials to access the mail server will be the user name and password
used when creating the Gmail account.
In the following example program you will see:
•
ServerAddr set to smtp.gmail.com
•
UserName set to (the gmail account user name).
•
Password (the one you established at gmail)
Gmail requires Transport Layer Security (TLS) to connect to
their mail server. You must go into the Settings Editor in the
Device Configuration Utility to enable TLS in the datalogger.
NOTE
C.2 Sending to Multiple Addresses
Sending to multiple email address can be done by using a comma to separate
the email addresses (
,
).
C.3 Sending a Text Message to a Phone
To send a text message to a phone, the email needs to be converted to a text
message via an email to text message gateway. Most cellular providers have
an email to text message service for their phone subscribers. To send a text
message to Verizon Wireless phone subscribers, you send an email to the (10
digit phone number of the person’s phone)@vtext.com
(
).
Most text messages are limited to 160 characters so any email messages greater
than 160 characters will be truncated.
C-1
Содержание RavenXTV
Страница 2: ......
Страница 32: ...Appendix A AceManager Setup without Template File A 4 This is a blank page...
Страница 39: ......
