background image

RavenXTV CDMA Sierra Wireless Cellular Modem 

 

PN 13494 Raven Mounting Kit—includes mounting hardware for securing 
the modem to below referenced environmental enclosure and a 9-pin male 
to 9-pin female cable. 

 

Antenna—the following antennas are available from Campbell 
Scientific.  Contact a Campbell Scientific Applications Technician for 
help in determining the best antenna for your application. 

o

 

The 

20679

 is a dual-band, omnidirectional antenna for our 

CDMA and GPRS digital-cellular modems.  It covers both the 
800-MHz band and the 1.9-GHz band.  For the 800-MHz band, 
the 20679 provides a 0-dBd gain.  For the 1.9-GHz band, the 
20679 provides a 3-dBd gain.  This antenna is recommended for 
locations where cellular coverage is strong. 
 
The 20679 includes a mount/u-bolt assembly that allows the 
antenna to be mounted to a mast, crossarm, or user-supplied pole 
(outer diameter of up to 1.5" (3.8 cm)). 

o

 

The 

18285

 1 dBd omnidirectional antenna.  This antenna is dual 

band, covering both the 800 MHz and 1.9 GHz bands, and is 
strongly recommended where cellular coverage is strong.  The 
18285 includes a mount/u-bolt assembly for attaching the antenna 
to a mast, post, or crossarm up to 1.5" (3.8 cm) in diameter.  

o

 

The 

14454

 9dBd Yagi Antenna is a higher gain antenna that 

should be "aimed" at the service provider's antenna.  The 14454 is 
a 800 MHz antenna and bracket/u-bolt assembly for attaching the 
antenna to a mast or post.  This antenna is recommended for 
fringe areas that require a higher gain antenna. 

o

 

The 

21831

 Half-Wave Dipole Whip Antenna is a lower gain 

antenna used in transmitting short distances.  It is an 800 MHz 
cellular antenna that terminates in a SMA Male connector for 
attachment to the modem.  This antenna is intended for use inside 
the enclosure.  Please note that the backplate of the enclosure is a 
grounded plane.  If it is interposed between the antenna and the 
cell tower, it may attenuate the strength of the transmission 
signal.  Simply turning the enclosure 90 to 180 degrees on its 
mounting mast may solve weak transmission issues.  

Содержание RavenXTV









































Отзывы: