Sierra Wireless iPass Compass 885, Руководство по установке

Страница: 10 / 14

iPass.com iPass Mobile Broadband Service Installation Guide – United Kingdom 10
7. Click Apply
8. Click OK
VERIFYING THAT YOUR iPASS MOBILE BROADBAND USB ADAPTER CAN CONNECT TO THE
NETWORK
You can confirm that your iPass Mobile Broadband USB adapter is able to connect to the network by
following the steps below:
1. Insert the USB adapter into your computer
2. Close iPassConnect, including the system tray icon (if the system tray icon is present, right-click
and select Disconnect and Exit , or if not currently connected, click Exit )
3. Double-click the 3G Watcher icon on your desktop.
3G Watcher will detect the available network as shown. (If you do not detect any network signal,
please relocate until you locate sufficient signal to connect)
4. Click Connect . 3G Watcher should connect to the network
5. Click Disconnect to disconnect from the network
6. Exit 3G Watcher by closing the window
WHAT TO DO IF iPASSCONNECT DOES NOT RECOGNIZE YOUR iPASS MOBILE BROADBAND
USB ADAPTER
Tip 1: Ensure that the 3G Watcher program is not running
iPassConnect and 3G Watcher both use the same system resources to access your iPass Mobile
Broadband USB adapter. As a result, 3G Watcher must be closed in order for iPassConnect to
recognize the device.
1. If 3G Watcher is running, close it