41113915
Rev 0.3
June 17, 2020
5
1. Introduction
The Sierra Wireless EM9190 Embedded Module is a FirstNet-ready (B14 LTE) M.2 module and
provides 5G NR Sub-6G, 5G mmWave, 4G LTE advanced Pro, 3G (HSPA+, UMTS), and GNSS
connectivity for a wide range of devices and purposes, including business, personal, and portable
computing and communication devices, IoT devices, M2M applications and industrial use cases.
EM9190 Embedded Modules are available in a variety of region-specific and function-specific SKUs,
including both 5G NR Sub-6G and 5G mmWave-capable variants.
1.1.
Accessories
A hardware development kit is available for AirPrime M.2 modules. The kit contains hardware
components for evaluating and developing with the module, including:
Development board
Cables
Antennas
Other accessories
For over-the-air 5G and LTE testing, ensure that an appropriate antenna is being used.
1.2.
Required Connectors
describes the connectors used to integrate the EM9190 Embedded Module into your host
device.
Table 1-1 Required Host-Module Connectors
1
Connector Type
Description
RF cables
— 5G NR Sub-6G/ LTE/GNSS
Mate with M.2-spec connectors
Four connector jacks (mate with I-PEX 20448-001R-081 or
equivalent)
RF cables
— mmWave
Eight connector jacks (mate with I-PEX 20955-001R-13 or
equivalent)
Two cables for each mmWave antenna module (up to 8 cables
in total)
EDGE (67 pin)
Slot B compatible
— Per the M.2 standard (
PCI Express M.2™
Specification Revision 3.0, Version 1.2
), a generic 75-pin
position EDGE connector on the motherboard uses a
mechanical key to mate with the 67-pin notched module
connector.
Manufacturers include LOTES (part #APCI0018-P001A01),
Kyocera, JAE, Tyco, and Longwell.
SIM
Industry-standard connector.
1. Manufacturers/part numbers are for reference only and are subject to change. Choose connectors that are appropriate
for your own design.
1
