1 / 2
P/N 466-5414 • REV B • ISS 071217
UltraSync LTE Cellular Module Installation Sheet
Product summary
This module adds LTE cellular capability to the UltraSync Self-
Contained Hub to allow reporting of system events and
enhanced interactivity.
Note:
This module is designed for use only with the ZW-6400
Self-Contained Hub.
Figure 1: LTE cellular module
Installing the module
To install the module:
1. Remove the cover on the back of the hub to expose the
cellular module bay.
2. Locate the 10-pin lead inside the hub and connect the LTE
Cellular Module. Take care not to crimp any wires during
installation.
Figure 2: LTE cellular module
3. The LTE Cellular module includes a built in door that
allows for the antenna(s) to exit the back of the hub.
4. Position the plastic door attached to the cellular module so
the top hooks on to the back of the hub.
5. Press down to secure the bottom of the door. The door
should click once in place.
Installing the antenna(s)
Note:
The LTE Antenna is a two-in-one antenna designed to
optimize performance and simplify installation.
To install the antenna(s):
1. Connect the two antenna lead wires to the connectors
located on the cellular module plastic door. Make sure to
firmly press the lead wires into the connectors for a secure
fit.
PLEASE READ THE ULTRASYNC SELF-CONTAINED HUB REFERENCE GUIDE BEFORE
USING THIS PRODUCT WHICH INCLUDES IMPORTANT SAFETY AND LEGAL
INFORMATION INCLUDING WARNINGS, WARRANTY DISCLAIMERS, AND LIMITATIONS
OF LIABILITY, AND COMPLETE INSTRUCTIONS. THE REFERENCE GUIDE IS AVAILABLE
AT: http://www.interlogix.com/intrusion/product/ultrasync-selfcontained-hub
S'IL VOUS PLAÎT LIRE LE GUIDE DE REFERENCE POUR LE HUB UltraSync AVANT
D'UTILISER CE PRODUIT QUI COMPREND LA SÉCURITÉ IMPORTANT ET JURIDIQUES
INFORMATIONS, Y COMPRIS LES AVERTISSEMENTS, GARANTIE EXCLUSIONS, ET
LIMITATIONS DE RESPONSABILITÉ ET INSTRUCTIONS COMPLETES. LE GUIDE DE
RÉFÉRENCE EST DISPONIBLE AU: http://www.interlogix.com/intrusion/product/ultrasync-
selfcontained-hub
