Sierra Wireless EM9190, Руководство по интеграции оборудования

Страница: 9 / 24

41113915 Rev 0.3 June 17, 2020 9
3. RF Specifications
The EM9190 includes Four MHF4 RF connectors for use with host-supplied antennas, and eight
MHF7S connectors for use with up to four mmWave antenna modules (2 connectors per antenna
module):
Figure 3-1 Module Connectors Include Image with Spacing Info

Sub-6G/GNSS connectors:

Main: Primary Tx/PRx path for 3G/4G/5G (except for n41)

Auxiliary: Diversity Rx (except for n41) and GNSS L1

MIMO1: MIMO1 Rx Path and n41 TRx

MIMO2: MIMO2 Rx Path and n41 DRx and GNSS L5

mmWave connectors:

Eight connectors
— Up to four mmWave antenna modules (QTM525 or QTM527), two
connectors as a pair (H/V) for each. The EM9190 module does not have integrated antennas.

Refer to Table 3-1 for each pair of coaxial connections. For low-power usage, if not all 4
QTM525 modules are equipped, integration sequence from QTM0 to QTM3 is recommended,
leave unused connectors NC (Contact Sierra Wireless as the RFC has to be updated to reflect
the number of QTMs). Note that for high-
power usage, it’s not recommended to leave any
QTM527 NC as it will violate 3GPP EIRP compliance for PC1.
Table 3-1 mmWave Port Assignment
QTM P_ON
QTM525 IF port <-> mmWave IF Connector QTM527 IF port <-> mmWave IF Connector
IF1 IF2 IF1 IF2
QTM0 QTM0_PON QTM0_H <-> IFH1 QTM0_V <-> IFV4 QTM0_H <-> IFH1 QTM0_V <-> IFV4
QTM1 QTM1_PON QTM1_H <-> IFH4 QTM1_V <-> IFV1 QTM1_H <-> IFH2 QTM1_V <-> IFV3
QTM2 QTM2_PON QTM2_H <-> IFH2 QTM2_V <-> IFV3 QTM2_H <-> IFH3 QTM2_V <-> IFV2
QTM3 QTM3_PON QTM3_H <-> IFH3 QTM3_V <-> IFV2 QTM3_H <-> IFH4 QTM3_V <-> IFV1
3