Sierra Wireless AirPrime HL6528 Series, Руководство пользователя

Страница: 14 / 19

4114877 Rev 1.0 November 21, 2013 14
Development Kit User Guide
Getting Started with the HL Series
Development Kit
3.2. Switching the Development Kit On
The Development Kit will automatically be powered on if Pin 1 and Pin 2 of CN601 are connected with
a jumper. Otherwise, push SW601 for approximately 1 second to power on the Development Kit.
Figure 5. CN601 and SW601
Two green LEDs, D403 and D501, are lit when the Development Kit has been properly powered on
and is ready for use.
Figure 6. D403 and D501
3.3. Communicating with the Embedded Module
3.3.1. Configure the COM Port
Configure the COM port settings by selecting the port which is connected to the Development Kit and
specifying the following port settings.

Bits per second 115200

Data bits 8

Parity None

Stop bits 1

Flow control Hardware
CN601
SW601
D403
D501