Sierra Wireless AirPrime HL6528 Series, Руководство пользователя

Страница: 13 / 19

4114877 Rev 1.0 November 21, 2013 13
Development Kit User Guide
Getting Started with the HL Series
Development Kit
7. Connect a handset to CN1105 for audio
communications.
8. Connect a USB cable to USB0 to get NMEA output.
9. Connect a 4V power supply unit to CN402.
Note: Make sure that Pin 2 and Pin 3 of CN403, as well as Pin
1 and Pin 2 of CN402 are connected with a jumper when
using a 4V power supply unit.
Alternatively, a lab power supply can be connected to
CN401 and CN400. (If using a lab power supply, it is
recommended to set it to 3.7V with 4A output to
prevent failure at power on.)
Note: Make sure that Pin 1 and Pin 2 of CN403, as well as Pin
2 and Pin 3 of CN402 are connected with a jumper when
using a lab power supply.
The AirPrime HL Series Development Kit should look like the following figure after it has been
properly set up.
Figure 4. AirPrime HL Series Development Kit (with an HL6528x Socket Board and HL6528 Embedded Module)