Sierra Wireless AirLink Raven-E 1 series, Руководство пользователя

Страница: 108 / 120

Configuration Commands
Rev 3.0B Feb.08 97
+WMDN= num
Set the Mobile Directory Number (MDN). C3x11 and C3x11E
only.
• num=phone number (Valid numbers are between 10 and
15 digits in length.)
For support of Wireless Number Portability in all non ‐ RUIM
software versions, changes to the MDN will update the
IMSI_M portion (least significant 10 digits) of the IMSI.
Changes to the MDN will also automatically update the Access
Overload Class values unless specifically modified using the
+WAOC command. The new IMSI_M and Access Overload
Class values will not be visible in the WIMI and WAOC
commands until after the changes are committed with the
WCMT command.
+WIMI= num
Set the IMSI (MIN/MSID preceded by the country code, Inter ‐
national Mobile Subscriber Identity). C3x11 and C3x11E only.
• num=MIN/MSID preceded by the country code
The MIN/MSID preceded by the country code is 15 digits in
length; MCC (3), MNC (2), MIN2 (3), MIN1 (7). For support of
Wireless Number Portability, changes to this number will NOT
update the MDN. Changes will automatically update the
Access Overload Class values unless specifically modified
using +WAOC command.
+WSID= [idx],[SID],[NID]
Set SID and NID. C3x11 and C3x11E only.
• idx=The location in the SID/NID list to store the values.
• sid=system ID
• nid=network ID
The new SID/NID values are committed to NV with the
+WCMT command (AT+WCMT=1). A maximum of 20 index
locations (0 ‐ 19) are supported. Error 22 is returned if the
specified index value is not in the valid range.
~NAMVAL=nam [,min,msid,sid,nid]
Tip: It is recommended to use the Setup Wizard for your carrier to
provision the modem.
Write account activation data. C3x10 and C3x10E only.
Following writing the values, the modem must be reset.
• nam=0