Sierra Wireless AirCard 710, Руководство пользователя, Страница: 36 / 53

AirCard 710 Wireless Network Ca r d - U s e r G u i d e
28 2130135
Level and I/O Port Address. In most cases, these values
will work. Click
Continue
.
8.
Click the
Close
button on the Network window to display
the Microsoft TCP/IP Properties window.
9.
Click
Yes
when prompted to restart your PC. (You must
restart your PC to complete the driver installation.)
10.
When the PC restarts, re-install your Service Pack.
11.
On completion of this step, the driver is installed and you
can proceed to configure the AirCard network card to use
your account (if it was not preactivated).
Account Configuration
The final step to making the AirCard 710 wireless network
card operational is configuring it touse your account.
Note: For information on
obtaining a GSM wireless
account from a service provider,
see “Introducing the AirCard®
710 Wireless Network Card” on
page 1 and “Getting Started” on
page 7. In particular, consult the
section “SIM Card Information”
on page 9.
If you purchased a preactivated card, this step is not necessary.
Oncethe software and driver are installed, the AirCard
network card is ready for use. Otherwise,you must use the
Activation Wizard to activateand configure your account.
Activation and Configuration Methods
Your service providermayoffer several methods of setting up
your AirCard network card to work on their GSM system—by
telephone, on the Web, in person at a retail outlet, or automati-
cally using your AirCard network card in your computer.
Consult your service provider for the best one to use.
Manual Activation
Manual Activation, the most common way of activating and
configuring your account, involves phoning your service
provider (or visiting their web site), exchanging information,
and entering your account information into the appropriate
fields in the Activation Wizard.You require a phone or
Internet connection, other than the AirCard network card
itself, to use this method.
To activate an account and configure your AirCard network
card:
1.
Insert the AirCard network card into your PC Card slot, if
it is not already inserted.
2.
If the Activation Wizard does not launch automatically,
run Watcher by selecting
Start
>
Programs
>
Sierra Wireless
>