Sierra Wireless AirCard 710, Руководство пользователя, Страница: 34 / 53

AirCard 710 Wireless Network Ca r d - U s e r G u i d e
26 2130135
3.
If the Network window opens, networking is already
installed. Proceed to the section “Installing the Driver
When Networking Is Already Installed ” on page 27.
4.
If a dialog box appears prompting you to install
Networking, the component has not yet been installed.
Proceed to the next section, “Installing the Driver When
Networking Has Not Been Installed”.
Installing the Driver When Networking Has Not Been
Installed
1. Click
Yes
to the prompt, “Do you want to install it now?”
to launch the wizard that installs Networking.
2. Click the check boxes on the first window of the wizard so
that
Wired to the network:
is checked and Remote access to
the network: is
not
checked. Click
Next
to proceed.
3.
Click the
Select from list...
button to open the Select
Network Adapter window.
4.
Click the
Have Disk...
button to open theInsert Disk
window.
5.
If you have copied the driver fromthe AirCard CD to your
hard drive, enter the path to the driver and click
OK
to
open the Select OEM Option window.
6.
If you are installing the driver from the AirCard CD, enter
d:\Drivers\WinNT
where
d
is the drive letter for your CD-
ROM drive and click
OK
to open the Select OEM Option
window.
7.
If Sierra Wireless AirCard 710 ishighlighted, click
OK
. The
Sierra Wireless AirCard 710 should appear in the Network
Setup Wizard under Network Adapters. Otherwise click
Cancel
and repeat the previous two steps.
8.
Click
Next
to display a list ofnetwork protocols.
9.
Ensure
TCP/IP Protocol
is checked (as well as any other
protocols appropriate to your network configuration) and
click
Next
to display a list ofnetwork services.
10.
Select the services appropriate to your network configu-
ration and click
Next
. (For the purpose of installing the
AirCard 710,it does not matter what selections you make
in this window.)
11.
Click
Next
.
12.
If the Windows NT Setup window appears, system files
are required to install the components you checked. Either
insert the Windows NT CDand enter your CD-ROM drive
letter, or enter the path to the .CAB files. Click
Continue
.
13.
Use the drop down menus to select an IRQ and I/O Space,
noting that the AirCard 710 requires 1 IRQ and 40 bytes of