Sierra Wireless AirCard 710, Руководство пользователя, Страница: 26 / 53

AirCard 710 Wireless Network Ca r d - U s e r G u i d e
18 2130135
Driver Installation
Note: A driver is software that
forms the interface between a
device (such as the AirCard 710
network card) and the operating
system on your PC (such as
Windows 98).
There is an AirCard driver for each supported operating
system on the AirCard CD. The AirCard 710 wireless network
card will not function properly unless the appropriate driver
for your operating system is installed.
In Windows 95, 98, Me, 2000, andXP, driver installation is
done through a wizard. Windows NT does not have a wizard
to facilitate driver installation. Follow the detailed instructions
for your operating system in one of the following sections.
Windows 98, Me, 2000, and XP
To install the AirCard driver in Windows 98, 2000 or Me,
follow these instructions:
Note: Do not forcefully insert the
AirCard network card into your
computer, or you may damage
the connector pins.
1.
Insert the AirCard CD into your CD-ROM drive, if not
already inserted, and close any Windows programs that
are running.
2.
If the CD start-up menu is displayed, use the
exit
option in
the lower left corner of the screen to exit the menu.
3.
With the label facing up, carefully insert the AirCard
network card into your computer’s PC Card slot. Windows
should detect that a new device has been inserted and
launch the wizard that guides you through the driver
installation.
Figure 3-3: Inserting the AirCard 710 Network Card
4.
Before working with the wizard, grasp the tip of the
AirCard 710 antenna and pullit to extend the antenna
fully (it should click into place). Then pivot the antenna
hinge so that it is vertical, as shown.