Sierra Wireless AirCard 580, Инструкция по установке

Страница: 31 / 44

Watcher Basics
Rev 2 Mar.11 29
Call Status Area
The Call Status Area displays messages related to the status or
progress of a connection.
Where a duration timer is shown, timing begins when the call
is initiated—not from the time the call is fully connected. This
is a measure of the time the AirCard has been using the radio
channel (a wireless network resource).
“
Click this display to exit PowerSave mode
” indicates that the
AirCard could not find a system within a 15 minute interval.
To conserve power, the AirCard reduces channel scanning to
once every three minutes. To force the AirCard out of
PowerSave mode, click in the Call Status Area. The AirCard
performs a channel scan and, if no network is detected, returns
to PowerSave mode.
In WiFi coverage; not connected
WiFi connected
WiFi signal strength (displayed in the right part of the Connection Status
Area)
The In Use indicator shows whether a call is in progress. No icon is displayed when
the AirCard is idle. Otherwise, one of these icons is displayed:
A high-speed (1xEV-DO) packet data call is in progress.
A high-speed (1X) packet data call is in progress.
A circuit switched data call is in progress.
A high-speed (1X or 1xEV-DO) packet data connection is dormant ; the
radio channel has been released allowing you to make and receive
voice calls. You can resume data transmission without the need of re-
establishing the connection.
Some applications may not be able to function on a
dormant
connection.
A fatal error has occurred and the AirCard is inoperable. Close Watcher
and restart your PC.
Table 6-1: Connection Status Area icons (continued)
Icon Meaning