Sierra Wireless AirCard 580, Инструкция по установке

Страница: 30 / 44

AirCard® 580 Wireless WAN Modem - Installation Guide
28 2130536
Connection Status Area
The Connection Status Area uses the icons shown in the
following table.
Table 6-1: Connection Status Area icons
Icon Meaning
AirCard not detected (displayed in the left part of the Connection Status
Area).
The Signal Strength indicator (displayed in the left part of the
Connection Status Area) uses bars to show the intensity of the radio
signal of the
CDMA network. The number of bars increases as signal
strength increases to a maximum of five bars.
When the bars are dimmed and the antenna icon is crossed out, no
connection is possible for one of these reasons:
•
No antenna is attached
•
You are outside the CDMA network coverage area
•
The signal strength is too weak
•
A network or account problem is preventing the AirCard from
obtaining service
Note: Optimal signal strength is obtained when the antenna is
perpendicular to the AirCard.
Indicates whether 1xEV-DO is available in this area.
Indicates whether 1X is available in this area. (Not displayed if 1xEV-DO
is available).
The Roaming Status indicator shows whether you are roaming onto the
network of a service provider other than your own.
When the indicator is off (gray), you are within the local coverage area
of your service provider. When the indicator is on (solid black), you are
in a “preferred” roaming area. When the indicator is blinking, you are
within the coverage area of a CDMA network but not in a “preferred”
roaming area.
Your coverage area and account charges depend upon your service
provider and the type of account you have. There may be surcharges
for roaming service that vary based on whether you are in a preferred or
non-preferred roaming area. If there is no roaming agreement between
your service provider and the local carrier, you may be unable to
complete calls.
WiFi device not detected (displayed in the right part of the Connection
Status Area).
No WiFi coverage