Sierra Wireless AirCard 580, Инструкция по установке

Страница: 19 / 44

Installation
Rev 2 Mar.11 17
5. Use the
Next
and
Back
buttons to navigate through the
wizard noting the following:
· To proceed with the installation, you must click
I accept
the terms in the license agreement
to indicate your accep ‐
tance of the terms of the license agreement.
· Use the default settings for the
Destination Folder
unless
you have special requirements and an advanced under ‐
standing of PC configuration. (The Destination Folder
dictates where the software is installed.)
6. If you are running Windows XP, a window indicates that
the driver files will be copied to your notebook. Click
OK
and click
Continue Anyway
on the Software Installation
window if it appears. The window may appear more than
once.
Note: Do not forcefully insert the
AirCard. This may damage
connector pins. For instructions
on removing the AirCard, see
page 18 .
7. When you are prompted to insert the AirCard, click
OK
.
Insert the AirCard into your PC Card slot (refer to
page 18 ).
Note: For Windows 98 and Me users: If your computer has a built-in
network adapter, your computer may appear to have stopped
responding during the card detection process. The operating system
is resolving resource issues related to your built-in adapter and the
AirCard. Do not abort the installation process. Allow several
minutes for the process to complete.
8. When you are notified that the installation is complete,
click
OK
.
9. If your operating system is Windows 98 or Me, restart
your PC from the
Start
menu.
Note: Windows 98 and Me users: If your computer has a built-in
network adapter, another long delay occurs the first time the AirCard
is inserted after this restart. Subsequent insertions of the card will not
experience this delay.
On completion of this step, Watcher, the Network Adapter
Manager, and the AirCard driver are installed.
Proceed to configure the AirCard to use your account (if it was
not pre ‐ activated). See “Activation” on page 19.