en
Cleaning and maintenance
48
2.
Unlock the levers on the heat
exchanger cover.
3.
Pull the heat exchanger cover out by
its grip.
4.
Remove all of the fluff from the heat
exchanger cover and remove the
fluff filter.
Note:
Ensure that no dirt remains on
the seals of the heat exchanger
cover.
5.
Rinse the inside of the heat
exchanger cover and the fluff filter
thoroughly under running water and
dry them.
Notes
– You can use a soft brush to clean
off more stubborn dirt.
– Make sure you dry the fluff
collector's filter thoroughly after
rinsing it. If the fluff filter is damp,
this may increase the drying time
and affect the drying result.
6.
Pull the fluff collector out horizontally.
Note:
The fluff collector may contain
fluff and residual water, which may
drip out of it when you pull it out.
7.
Open the fluff collector and remove
any fluff.
Содержание WT47XKH1GC
Страница 43: ...Crease removal function en 43 ...