Siemens WT47XKH1GC, Инструкция по установке и эксплуатации

Страница: 41 / 64

Crease-removal function
en
41
…
Crease-removal
function
Crease-removal function
This appliance has programs for
removing creases from dry clothing that
has not been worn for long and for
reducing odours.
Notes
■
See the laundry tips.
~
Page 25
■
Wash clothing with traces of
perfume, deodorant or sweat before
wearing again.
■
Do
not
run a crease-removal
program with the following items:
– Items made from wool, leather,
viscose, or featuring metal,
wooden or plastic parts.
– Waxed and oiled jackets.
■
Do not use dryer cleaning sets.
Filling the water tank
Your appliance uses cold drinking water
to remove creases from dry clothing
that has not been worn for long. Use the
water jug provided to pour the water
into the filling hole in the front of the
appliance.
Caution!
Risk of material damage and damage
to the appliance
Fluff may remain in the appliance or the
appliance may be damaged by deposits
or debris if drinking water is not used
for crease removal.
■
Always use cold drinking water for
crease removal.
■
Do not use condensed water,
distilled water, additives or descaler.
1.
Select the required crease-removal
program.
~
"Overview of
programmes" on page 22
2.
Configure the settings for the
required crease-removal program.
3.
Press
Start/Reload
.
4.
ÿ
will appear on the display.
Note:
If
ÿ
does not appear on the
display, the water tank is already
filled with the correct amount of
water and the program will start.
5.
Pull out the condensation container
horizontally.
6.
Use the water jug provided to pour
approx. 180 ml cold drinking water
into the filling hole in the
front
of the
appliance, until
ÿ
goes out on the
display and an audible signal
sounds.
Note:
If you pour more than 180 ml
drinking water into the appliance and
ÿ
does not go out on the display,
this means that the drinking water
has been poured into the wrong
filling hole or the appliance is not
fully level. Pour the drinking water
into the filling hole on the front or
make the appliance level.
~
"Installing the appliance"
on page 13
7.
Push the condensation container
back into the appliance until you feel
it lock into place.