Setting the signal
en
19
Programme end during rinse
hold
- - - -
0
appears in the display panel and
the indicator lamp of the
‹
button
flashes.
Continue the program by:
■
Pressing the
‹
button (the laundry
will be drained with the default spin
speed setting*) or
■
Selecting a spin speed or set the
program selector to
Spin
and then
pressing the
‹
button.
* depending on the chosen program
~
Overview of programmes
Programme end
End
appears in the display panel and
the indicator lamp of the
‹
button is off.
Removing laundry/switching
off the appliance
1.
Open the washing machine door
and remove the laundry.
2.
Turn the programme selector to
Off
$
. Appliance is switched off.
3.
Turn off the tap.
Not required for Aqua-Stop models.
Contents of package
Notes
– Do not leave any items of laundry
in the drum. They may shrink in
the next wash or discolour
another item.
– Remove any foreign objects from
the drum and the rubber seal –
risk of rusting.
– Leave the washing machine door
and detergent drawer open so
that any residual water can dry
away.
– Always remove the washing.
– Always wait until the programme
ends, as the appliance could still
be locked. Switch the appliance
on and wait for the unlocking
device.
– If at the end of the programme
the display has gone out, the
energy saving mode is active. To
activate, select any button.
M
Setting the signal
Setting the signal
You can change the following settings:
■
The volume for the information
signals (e.g. at the end of the
program) and/or
■
The volume of the audible button
signals.
You will need to activate the setting
mode in order to change these settings.
Activate setting mode:
1.
Set the program selector to
position 1. The washing machine is
switched on.
2.
Press the
‹
button and, at the same
time, turn the program selector
clockwise to position 2. Release the
button.
The setting mode is activated and the
preset volume for the information signals
appears in the display panel (e.g. at the
end of the program).
1/2/3/...
positions on the program
selector
