background image

10.99

Forward

 Siemens AG 1993 All Rights Reserved     6ZB5 440-0RV02

1 - 1

WS 720 A (BN - COM 720 description)

1

Forward

What information is to be
found in this manual?

This pocket guide describes the installation and use of the COM
720 software. The hardware and software requirements are
specified. Some masks are explained with examples.

For whom is this manual
intended?

The guide is intended for machine design engineers and for
service specialists.

Each group, engineers and specialists must be qualified as
outlined on page 1-2.

What prior knowledge is
needed?

It is assumed that the user of this guide is familiar with general
machine safety guidelines and particular safety requirements of
the country where the machine is to be used.

Familiarity with Windows and with the modules WS721/WS720
are needed to be able to use the COM 720 software.

Finding your way about the
manual
?

The manual is divided up into the sections:

ã

Overview

ã

Installation

ã

Operation

The guide is complemented by a function overview, hints to
using Windows, and lists of the functions in the menus and of
the pushbuttons.

Содержание WS 720 A


































Отзывы: