en
Positioning and connecting
20
4.
Disconnect the appliance from the
mains.
5.
Remove the hoses.
6.
Empty the dispensers.
Caution!
Risk of damage to the appliance
caused by detergent/fabric softener
leaking from the dispensers
Leaking detergent/fabric softener
can prevent the appliance from
working correctly, e.g. due to
damage to the electronics.
Empty the dispensers before
transporting the appliance.
Installing the transport locks:
1.
Remove the covers and keep them
in a safe place.
Note:
Use a screwdriver if
necessary.
2.
Insert all four sleeves.
a) Clip the mains cable securely in
the holders.
b) Insert and tighten the screws.
c) Clip the hoses securely in the
holders.
Before switching on the appliance
again:
Notes
■
The support struts
must
be
removed.
■
The transport braces
must
be
removed.
"Removing the transport locks"
■
Pour approx. 1 litre of water into
manual dosing compartment, select
the
Drain
p
programme and start.
This will prevent detergent from
flowing straight into the drain during
the next wash.