Operation of the device
NL
Note:
When drying is activated, you can
change the program directly with the
program selector.
■
If you do not take out the laundry within
15 minutes after the drying process is
complete, the anti-crease process will
start to prevent the laundry from
creasing. The process takes
approximately 30 minutes.
0:00,
£'˜,̃ £©
and
“Ÿš are shown alternately in the
display and the symbol O is displayed
as the status symbol. You can touch
any button to start this process
to end. The door will then unlock
and the laundry can be removed.
Cancel the program
For programs washing at high
temperatures:
1.
touch the I
Start/Reload
button on.
2.
To cool laundry: select
To rinse.
3.
touch the I
Start/Reload
button on.
For programs washing at low
temperatures:
Removing the laundry /
switching off the appliance
1.
touch the I
Start/Reload
button on.
2.
Choose
Spin/Drain.
3.
touch the I
Start/Reload
button on.
1.
Set the program selector to (
From).
2.
Open the door and take the laundry out
of the drum.
3.
Turn off the water tap.
For programs in the drying process:
1.
Turn the program selector to any other
program.
2.
Wait a few minutes for the laundry to
cool and the door to unlock.
Note:
Not required for Aqua-Stop
models.
Clues
■
Do not leave any laundry in the drum.
They may shrink with the next wash
or other
discolor laundry.
Remove all foreign objects from the
drum and from the rubber
seal off – risk of rust.
Wipe the rubber seal dry.
Program end
■
“Ÿš (
End)
lights up in the display and the A
and O displays are off.
■
When you 2 selected, the water is only
pumped out after rinsing; there will not be
centrifuged.
Clues
■
When •©£ (
hot)
flashes on the display
before the
drying program is completed, the
temperature in the drum is high. The
drum cooling program is carried out
until the temperature in the drum is
decreased.
■
Leave the door and detergent
drawer open to allow any
remaining water to evaporate.
43