Siemens WM6HXK0ODN, Руководство пользователя и инструкции по сборке

Страница: 57 / 72

Troubleshooting
en
57
Fault Cause troubleshooting
"E:10 / -00 / -10 / -20" The pump for the intelligent
dosing system is blocked.
1.
Switch off the appliance.
2.
Clean the pump unit.
→
"Cleaning the detergent drawer",
Page 49
3.
If this indicator appears again, call
our after-sales service.
→
"Customer Service", Page 67
Note: You can start the washing pro-
gramme if you deactivate the intelli-
gent dosing system and dose manu-
ally.
→
"Buttons", Page 25
"E:60 / -2B" The unbalanced load detec-
tion system has interrupted
the spin cycle because the
laundry is unevenly distrib-
uted.
▶
Redistribute the laundry in the
drum.
Note: Where possible, mix large and
small items in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
The water pressure is low. No remedial action possible.
The filter in the water inflow
is blocked.
▶
"Clean the water inflow filter"
→
Page 54 .
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is
kinked or jammed.
▶
Ensure that the water inlet hose is
not kinked or jammed.
"E:35 / -10" There is water in the base
trough.
▶
Turn off the water tap.
▶
Call the after-sales service.
→ "Customer Service", Page 67
The appliance is leaking.
▶
Turn off the water tap.
▶
Call the after-sales service.
→ "Customer Service", Page 67
The detergent drawer has
not been pushed in as far as
it can go.
▶
Push the detergent drawer in as far
as it will go.
The pump unit is not inser-
ted.
1.
Insert the pump unit into the deter-
gent drawer.
→
"Cleaning the detergent drawer",
Page 49
2.
Push the detergent drawer in as far
as it will go.