en
Positioning and connecting
38
Transportation
e.g. when moving home
Preparatory work:
1.
Turn off the water tap.
2.
Reduce the water pressure in the
supply hose.
Maintenance – filter in the water
supply
~
Page 25
3.
Drain the remaining detergent
solution.
Maintenance – detergent solution
pump blocked
~
Page 24
4.
Disconnect the washing machine
from the mains.
5.
Remove the hoses.
Before initial use:
Notes
■
The transport locks
must
be
removed.
~
Page 33
■
To prevent unused detergent from
flowing straight into the drain during
the next wash: Pour
approximately 1 litre of water into
compartment
II
and select and start
the Spin/
Drain
programme (if only
drain cycle is required, set (Spin
speed)
0
on - - - ).
Installing the transport locks:
1.
Remove the covers and keep them
in a safe place.
Use a screwdriver if necessary.
2.
Insert all four sleeves.
Clip the mains cable securely in the
holders. Insert and tighten the
screws.
Содержание WM10K160IN
Страница 39: ...6 ...
